| Pioneer House,
Woolpit Road
Rattlesden
Bury St Edmunds
IP30 0RZ Tel:
+44 (0) 1449 736777
Fax:
+44 (0) 1449 737322
Contact::
Simon Ruffles
PR Consultant:
CML & Associates
Roger Lindley
Tel: +44 1279 600598
Fax: 0870 705 255
Email:
Web: http://www.cmlpr.co.uk
Mail Address:
CML House
7 Bell Mead
Sawbridgeworth
Herts CM21 9ES
|
|
 PIONEER PUMP LAUNCHES NEW 200 mm FOOD PUMP (Release March - 2009)
The new 200 mm food pump from Pioneer Pump delivers double savings. It minimises product damage and provides high-operating efficiency.
Pioneer Pump, a global manufacturer of hot oil and blanching pumps for the food industry, will be using the ANUGA FoodTech exhibition to launch a new 200 mm (8-inch) Hydrotransport Food Pump for use in the vegetables processing and french-fry markets.
Full release
|
|
|
PIONEER PUMP Again Lead The Way in Pumping efficiency with introduction of two new pumps at MinExpo 2008 (Release MinExpo-1 - August 2008)
Pioneer Pump continues to lead the world in the development of high-efficiency pumping solutions for higher productivity at lower cost – a major consideration in time of high fuel costs – with the announcement of two further additions to the existing product range. . .. full release |
|
|
PIONEER PUMPS EMPTY ARTIC CIRCLE HARBOUR AHEAD OF SCHEDULE (Release 7002 - October 2007)
The Norwegian contractor Secora SA is advanced on a challenging project on the island of Værøy, off the coast of Norway, 130 kilometres north of the Arctic Circle. To accommodate larger fishing vessels and ferries, the harbour needs to be deepened. Normally dredgers would be used for this task, but the basalt granite floor of the harbour at Sørlands means that the only way is to excavate the additional 3 m depth by drilling and blasting. full release
|
 |
Pioneer Manage Rapid Turnaround
of Skidmounted
Pump
Set for Delivery to Ascension Island
The ability to respond quickly to customer requests is one of the services that is setting Pioneer Pumps apart from the rest.
Given just one week to supply an urgent order for delivery to Ascension Islands, in the south of the Atlantic Ocean, the company built, engineered and fully tested a unit to customer satisfaction.
Pulling all stops out, Pioneer Pump completely packaged an 8” (200 mm) pump set with JCB 444T engine, ran it through their test bench and delivered it to Morrison Construction in the Ascension Islands in less than one week after receiving the call.
The pump set, complete with spark suppression equipment and heavy duty 24 hour run tank, was quickly built and tested in their Suffolk factory. The pump set was built around a Pioneer PP88-S12 self-priming centrifugal pump coupled to a JCB 44T diesel engine. The pump was configured to deliver 650 m³ per hour at 1800 rpm. It has a maximum head height of 50 m. Pioneer Pumps is the only company offering JCB engine options to its range of pump sets. full release
|
|
CENTRIFUGAL PUMPS WITH SUPERIOR PERFORMANCE AND EFFICIENCY
The uniquely engineered range of Pioneer pumps are so efficient in their ability to handle large volumes of water that they invariably outperform all other equivalent sized pumps.
As the pumps on display illustrate, not only are Pioneer Pumps much more efficient but are also highly transportable and their low sound levels, even under full power, make them ideal for even the most sensitive of locations.
Pioneer Pumps are displaying two variations of the popular 4” PP100 range of vacuum assisted self-priming pumps - Pioneer PP100 Ultra Silent Pump and a PP100 Silent Pack. Both pumps are powered by latest technology Isuzu 3-cylinder diesel engines, which have proven ability to maximise on fuel efficiency. full release
|
|
| Pioneer Launch First Ever Pump Sets
Powered by
JCB Engines
The increasingly popular Pioneer Prime range of pumps produced by Pioneer Pump Ltd now includes new 6” and 8” vacuum assisted, self-priming centrifugal pumps configured as open skid-mounted models powered by the proven JCB 444T diesel engine – the same advanced engine as that used in the highly successful JCB range of Backhoe Loaders. . .
full release click image for high resolution
|
 |
| New for General Site Dewatering Applications –
The Pioneer Quattro 3” Centrifugal Pumps
Hillhead 2005 is the launch of the PP33-0752CA trailer mounted self-priming, vacuum assisted centrifugal 3” pump set. In fast-tow trailer-mounted configuration, the 750 kg unit is easily towed behind a standard pickup truck for fast delivery to required location.
full release
|
|
New Series of Super Silent Pumps from Pioneer
are the Quietest in the UK
The new super silent Quattro PP44-3LD1 is a 4” pumps – the first in a completely new series of self-priming, vacuum assisted centrifugal pumps from Pioneer. Shown at Hillhead mounted on a skid, the new pump has a maximum flow of 300 m³ per hour – as much a twice that typically associated with a 4” pumps and almost as much as a 6” equivalent.
full release
|
|
| Pioneer Pumps Help Hanson reduce Pump Running Costs By Up To 30%
Hanson Aggregates, a major UK quarry operator, has dramatically reduced its pumping costs at one of its major sand and gravel quarries by switching to Pioneer Pumps. . .
more images
|
|
